07949211323 sales@dw-wifi.com

Access Point Accessories

access point accessories, cisco access point accessories, cisco accessories

CISCO OUTDOOR ACCESS POINT ENCLOSURE KIT

For Cisco 1600, 1700, 1800, 2600, 2700, 2800, 3500, 3600, 3700, 3800 Series APs 

This access point enclosure kit is designed specifically for the range of Cisco Aironet Wi-Fi access points. It’s unique modular design supports up to a total of 6 external RP-TNC bulkhead antenna ports. It is hence compatible with the following Cisco access point models and the complete range of Cisco Wi-Fi antennas. 

CISCO ACCESS POINT WALL BRACKET

Part No: BAPLC – For Cisco Access Points

Cisco access points with integrated omni-directional antennas will provide optimum Wi-Fi coverage when mounted to a ceiling. In circumstances where the access points need to be wall mounted, the BAPLC bracket is designed to allow the access point to be mounted to a wall whilst maintaining a ‘ceiling mounted’ orientation to optimise Wi-Fi coverage and hence improve the performance of the access point.

AEROHIVE ACCESS POINT WALL BRACKET

Part No: BAPLA – For Aerohive Access Points

Aerohive access points with integrated omni-directional antennas will provide optimum Wi-Fi coverage when mounted to a ceiling. In circumstances where the access points need to be wall mounted, the BAPLA bracket is designed to allow the access point to be mounted to a wall whilst maintaining a ‘ceiling mounted’ orientation to opti-mise Wi-Fi coverage and hence improve the performance of the access point.

 

CISCO OUTDOOR PAN & TILT ANTENNA BRACKET

For Cisco Antenna Part No AIR-ANT2566P4W-R= 

This bracket is designed specifically for the Cisco 4-element dual band patch panel directional antenna (Cisco part number AIR-ANT2566P4W-R=). The antenna components go through an anodising treatment to provide an aes-thetically pleasing and weatherproof finish for indoor and outdoor use. 

OUTDOOR ACCESS POINT ENCLOSURE KIT

Part No: PCKX600S

For Cisco 1600, 1700, 1800, 2600, 2700, 2800, 3500, 3600, 3700, 3800 Series APs 

The enclosure enables Cisco access points to be deployed into a variety of harsh environments to protect your investment by preventing damage to the access point from water and dust. 

A pressure compensation device is fitted as standard. This helps combat the formation of condensation in-side the enclosure due to variations in outdoor temperature enabling you to deploy your access points out-doors in all weathers. 

Another key benefit is the unique design whereby the access point antenna ports are replicated externally. This is most important as it enables rapid deployment of your chosen Cisco antennas outside the enclosure thus maximising the range and performance of the antennas. 

The polycarbonate enclosure kit ships with a back plate for mounting the ac-cess point using its bracket. This secures to the inside of the enclosure via 6 screws. 

The enclosure lid seals against a gasket located on the enclosure box and is attached using 6 polycarbonate lid fixing screws. 

Each enclosure comes pre-fitted with an Ethernet cable gland through which the Ether-net data cable can be routed inside the enclosure for connection to the access point whilst maintaining the IP rating of the enclosure. 

Fluctuations in the ambient temperature can cause pressure conditions that can lead to con-densation into the enclosure. Each enclosure is hence fitted with a PCD ‘pressure compen-sation device’ to help equalise the pressure. 

The generic design provides a total of 6 removable blanking plugs. These can be removed as required for fitting the required number of antenna ports for your access point in the form of custom made ‘Antenna Pigtail Cables’. Contact us for more information.

CISCO ACCESS POINT WALL BRACKET

Part No: BAPLC – For Cisco Access Points
Maintains ceiling mount orientation to optimise Wi-Fi coverage

Cisco access points with integrated omni-directional antennas will provide optimum Wi-Fi coverage when mounted to a ceiling. In circumstances where the access points need to be wall mounted, the BAPLC bracket is designed to allow the access point to be mounted to a wall whilst maintaining a ‘ceiling mounted’ orientation to optimise Wi-Fi coverage and hence improve the performance of the access point. SUPPORTED ACCESS POINTS This bracket is suitable for the following models of Cisco access point.

AEROHIVE ACCESS POINT WALL BRACKET

Part No: BAPLA – For Aerohive Access Points
Maintains ceiling mount orientation to optimise Wi-Fi coverage

Aerohive access points with integrated omni-directional antennas will provide optimum Wi-Fi coverage when mounted to a ceiling. In circumstances where the access points need to be wall mounted, the BAPLA bracket is designed to allow the access point to be mounted to a wall whilst maintaining a ‘ceiling mounted’ orientation to opti-mise Wi-Fi coverage and hence improve the performance of the access point.

    CISCO OUTDOOR PAN & TILT ANTENNA BRACKET

    Part No: B2566NPA
    For Cisco Antenna Part No AIR-ANT2566P4W-R=

     

    The performance of your Cisco wireless LAN can be compromised by poor antenna installation. The unique two hinge design of this antenna mounting bracket allows the antenna to be aimed specifically at its intended tar-get. This is achieved by ‘pan’ and ’tilt’ movement of the face of the antenna to provide adjustment in both the hori-zontal and vertical planes. The antenna mounting bracket is designed for easy mounting to any flat surface and ships with fixing stud bolts for attaching the Cisco antenna to the front face of the bracket.

    This bracket is suitable for the following models of Cisco antenna: